Climar is committed to providing peace of mind when it comes to your project. Please view some of our most commonly asked questions
The prices for our ColourFence can be found on the respective product page.
Yes, as long as the colours are the 4 standard colours available, you can mix and match the trellis and panel to fit your preferences.
Generally we advise the lead time to be between 4-6 weeks.
Yes we confidently offer a written 25 year warranty on fence materials, and two years on fitting, providing installations are undertaken, and the fence maintained, in accordance with our specifications.
No. ColourFence fencing has not been designed or tested for use in this application. It is highly likely the soil will cause corrosion of the steel.
A regular hose-down will keep the paint finish in good condition. Keep the bottom rail free of dirt and debris to ensure the drainage holes are not blocked and water can run away. The fences should be clear of the ground at all times. Avoid over-spraying pesticides and other garden chemicals on to the fence.
ColourFence cannot prevent graffiti, however, the infill profile means that “tags” are much more difficult to execute accurately than on a completely flat service, and this can act as a deterrent.
ColourFence garden fencing comes in 4 colours - green, brown, cream and blue.
Standard heights for ColourFence fences are 1.0m, 1.5m and 1.8m and 2.1m. However ColourFence can be readily cut to any specific size on site, although there may be a small additional labour charge.
Yes. Although the 2 year fitting guarantee we usually provide when fitted by our franchisees does not apply.
Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion. It is best not to touch up minor damage, such as scratches, with paint.
Yes but we would strongly advise against this. The paint finish will be markedly inferior to the original and this will also void the fence warranty. Please contact the ColourFence Head office if you require further details.
ColourFence is made from a high tensile alloy that is sometimes known as ‘self-healing’ because the zinc in the surrounding coating protects the newly exposed edge. In the presence of moisture, a reaction occurs between the zinc and the steel which results in galvanic protection of the exposed steel, thereby inhibiting corrosion.
ColourFence is not produced with different colours of exterior grade top coat on each side. The only way to achieve this is to paint one side. Over-painting will, however, result in a surface which is not as durable as the original oven-baked steel paint finish and painting the fence will also void any warranty.
The prices for our ColourGate can be found on the prospective product pages.
Single gates have a 90cm opening, extra wide up to 160cm, and double driveway gates up to 300cm for ColourFence driveway gates and 340cm for ColourRail driveway gates.
For a ColourFence gate, they can be mounted free standing using the appropriate posts, or as an extension of your ColourFence fencing. For your ColourRail gate, they can be mounted free standing using the appropriate posts, or between existing pillars/walls.
ColourRail gates are manufactured from heavy duty tubular steel and are ideal for situations where full screening is not required. ColourRail gates look equally at home as part of a ColourRail or ColourFence installation, and of course can be supplied as stand-alone products in their own right. All our ColourRail gates are manufactured and powder coated in our own workshops to our exacting standards and lastly, ColourRail gates are an economic and very attractive alternative to more costly wrought or cast iron.
For ColourFence and ColourRail gates, we supply a range of standard widths, from pedestrian to driveway, and in heights up to 2.1m.
Gates can be provided from both Colourfence and ColourRail ranges in standard colours of brown, cream, blue and cream. Additionally, ColourRail gates can also be supplied in gloss black and in up to 300 RAL colours at an additional charge.
ColourFence gates are manufactured from a combination of Colorbond steel and high quality pre galvanised, powder coated square tube. Available in a plain or lattice top finish they are ideal in situations where full privacy screening is required. They compliment any garden environment, with the benefit of being both durable and maintenance free, just like our fencing.